The concentrations of the noble metals in Southern African flood-type basalts and MORB: implications for petrogenesis and magmatic sulphide exploration

Concentrations of the platinum-group elements have been determined in several suites of southern African flood-type basalts and mid-ocean ridge basalt (MORB), covering some 3 Ga of geologic evolution and including the Etendeka, Karoo, Soutpansberg, Machadodorp, Hekpoort, Ventersdorp and Dominion magmas. The magmas cover a compositional range from 3.7 to 18.7% MgO, 26–720 ppm Ni, 16–250 ppm Cu, and <1–255 ppb total platinum-group elements (PGE). The younger basalts (Etendeka, Karoo) tend to be depleted in PGE relative to Cu, while most of the older basalts (Hekpoort, Machadodorp, Ventersdorp, Dominion) show no PGE depletion relative to Cu. Further, the younger basalts tend to have lower average Pt/Pd ratios than the older basalts, and the MORBs have lower average Pt/Pd than the continental basalts within the broad groupings of "old" and "young" basalts. This may reflect (1) a decreasing degree of mantle melting through geologic time, and (2) source heterogeneity, in that the MORBs are derived from predominantly asthenospheric mantle, whereas the continental basalts also contain a lithospheric mantle component enriched in Pt. In addition to these factors, some PGE fractionation also occurred during differentiation of the magmas, with Pd showing incompatible behaviour and the other PGE variably compatible behaviour. The examined southern African flood-type basalts and MORB appear to offer limited prospects for magmatic sulfide ores, largely because they show little evidence for significant chalcophile metal depletion that could be the result of sulphide extraction during ascent and crystallization.Editorial responsibility: I. Parsons     

Benthic carbonate factories of the Phanerozoic

Marine carbonate precipitation occurs in three basic modes: abiotic (or quasi-abiotic), biotically induced, and biotically controlled. On a geologic scale, these precipitation modes combine to form three carbonate production systems, or "factories" in the benthic environment: (1) tropical shallow-water factory, dominated by biotically controlled (mainly photo-autotrophic) and abiotic precipitates; (2) cool-water factory, dominated by biotically controlled (mainly heterotrophic) precipitates; and (3) mud-mound factory, dominated by biotically induced (mainly microbial) and abiotic precipitates. Sediment accumulations of the factories differ in composition, geometry, and facies patterns, and some of these differences appear prominently in seismic data, thus facilitating subsurface prediction. The characteristic accumulation of the tropical factory is the flat-topped, often reef-rimmed platform. In cool-water systems, reefs in high-energy settings are scarce and hydrodynamic influence dominates, producing seaward-sloping shelves and deep-water sediment drifts often armored by skeletal framework. The typical accumulation of the mud-mound factory is groups of mounds in deeper water. Where the mud-mound factory expands into shallow water, it forms rimmed platforms similar to the tropical factory. The tropical factory is most productive; the mud-mound factory reaches 80–90%, and the cool-water factory 20–30% of the tropical growth rate. The three factories represent end members connected by transitions in space. Transitions in time are linked to biotic evolution.     

NOAA AR 8210: EVOLUTION AND FLARES FROM MULTIBAND DIAGNOSTICS

NOAA 8210 has been a region showing a remarkable level of activity well before solar maximum. Dominated by a large, rapidly rotating spot, it produced several intense flares during its disk passage at the end of April–beginning of May 1998. We examine the development of AR 8210 in H and white light (WL) and study the evolution of its complex magnetic topology. While the other principal flares are briefly reviewed, the great X1.1/3B flare of 2 May, which was observed at Kanzelhöhe Solar Observatory during a SOHO/UVCS ground support campaign, is studied in detail. This event has been documented in full-disk H and Na-D intensitygrams, Dopplergrams, and magnetograms, with a time cadence of one minute each. The flare was associated with a CME and produced significant geomagnetic effects. Furthermore, we point out the perspectives for our planned Flare Monitoring and Alerting System, since the two new instruments (Magneto-Optical Filter and Digital H camera), which made their first operational run with the campaign, are crucial components for this program.     

Focal Mechanisms and Stress Field in The Region Vogtland/Western Bohemia

We calculated focal mechanisms for 30 of the strongest events (1.5 M _L 3.3) in distinct subregions of Vogtland/Western Bohemia between 1990 and 1998. Our investigations are concerned with events of the swarms near Bad Elster (1991), Haingrün (1991), Nový Kostel (1994 and 1997) and Zwickau (1998), two events from a group of earthquakes near Klingenthal (1997) and eight single events. Seismograms were provided by the digital station networks of the Geophysical Observatory of the University of Munich, the Technical University of Freiberg, the Academy of Sciences of the Czech Republic in Prague, the Masaryk University in Brno and some nearby stations of the German Regional Seismic Network (GRSN). To calculate focal mechanisms two inversion methods were applied. The inferred focal mechanisms do not show a simple, uniform pattern of seismic dislocation. All possible dislocation types – strike-slip, normal and thrust faulting - are represented. The prevailing mechanisms are normal and strike-slip faulting. Considerable differences in the fault plane solutions are noted for the individual subregions as well as in some cases among the individual events of a single swarm. For the Nový Kostel area we succeeded to resolve a change in the orientations of the nodal planes for the two successive swarms of December 1994 and January 1997. Besides this we also observe a change in the mechanisms, namely from strike-slip and normal faulting (December 1994) to strike-slip and thrust faulting (January 1997). Based on the inferred focal mechanisms the stress field was estimated. It turned out, that the dominating stress field in the region Vogtland/Western Bohemia does not substantially differ from the known stress field of West and Central Europe, being characterized by a SE-NW direction of the maximum compressive horizontal stress. We conclude that the seismicity in the Vogtland/Western Bohemia region is not predominantly caused by an independent local stress field, but rather controlled by the dominating stress regime in Central Europe.     

Sublimation pressure and sublimation enthalpy of H2O ice Ih between 0 and 273.16 K

The sublimation of water in the region of extremely low pressures and temperatures meets increasing interest for the exploration of icy cosmic bodies. At temperatures below 130 K, the shape of the sublimation curve of H₂O is not known; neither experimental data nor theoretical treatments exist for this region. Based upon theoretical upper and lower bounds for the heat capacity of water vapor in this range, a narrow region in the pressure-temperature diagram is identified which must necessarily enclose the sublimation curve down to virtually any lower pressures and temperatures. Within this region, an approximate sublimation curve is computed from the 2006 Gibbs potential of ice Ih, using available heat capacity data points of water vapor between 10 and 130 K. The theoretical zero-point limiting law of the sublimation pressure is derived. Valid between 20 and 273.16 K, correlation equations for the sublimation enthalpy and the sublimation pressure are fitted to the computed data. All quantities are expressed in the 1990 temperature scale ITS-90. Under cosmic conditions, our results suggest that the sublimation of ice is unlikely below 50 K and impossible below 23 K.     

Geometry and chronology of growth and drowning of Middle Triassic carbonate platforms (Cernera and Bivera/Clapsavon) in the Southern Alps (northern Italy)

The depositional architecture and the geometric relationships between platform-slope deposits and basinal sediments along with paleontological evidence indicate the time interval of the younger Anisian Reitziites reitzi ammonoid zone to largely represent the main stage of platform aggradation at the Cernera and Bivera/Clapsavon carbonate platforms. Published and new U-Pb age data of zircons from volcaniclastic layers bracketing the stratigraphic interval of platform growth constrain the duration of platform evolution to a time span shorter than 1.8±0.7m.y., probably in the order of 0.5-1m.y., reflecting fast rates of vertical platform aggradation exceeding 500 m/m.y. In the range of growth potentials for shallow-water carbonate systems estimated in relation to the time span of observation, this high rate is in agreement with values for short intervals of 10⁵-10⁶yrs (e.g., Schlager 1999). After drowning, the platforms at Cernera and Bivera/Clapsavon were blanketed by thin pelagic carbonates. On the former platform flanks the draping sediments in places comprise red nodular pelagic limestones (Clapsavon Limestone) similar in facies to the Han Bulog Limestones occurring elsewhere in Middle Triassic successions of the Mediterranean Tethys. The drowning of vast areas of former carbonate platforms possibly triggered the onset of bottom-water circulation in adjacent basins as suggested by the abrupt transition from laminated to bioturbated pelagic nodular limestones in the Buchenstein Formation which occurred close to the time of initial platform submergence. During the Late Ladinian the topographic features of the drowned platforms were onlapped by rapidly deposited, predominantly clastic successions including coarse breccias and volcanic rocks sealing and preserving the peculiar stratigraphic setting.     

Alternative Validation of a LC-MS/MS-Multi-Method for Pesticides in Drinking Water

The development of instrumental analytics such as the LC-MS/MS has made it possible to quickly determine many component concentrations in a single chromatogram. However, the validation of such multi-methods needs new strategies for robustness and optimization. Statistical execution of analytical tests is one tool that can be utilized to meet this requirement. A Central Composite Design (CCD) was utilized for the validation of an LC-MS/MS multi-method for 84 analytes. The experimental design includes six design variables and two non-design variables (response variables). Concentration, ionization temperature, dwell time, gradient, flow (of eluent), and spraying/curtain gas (continuous design variables) were varied on five different levels; the whole design encompassed 91 runs. To investigate the robustness of a LC-MS/MS method both peak sensitivity and chromatographic separation had to be verified. Therefore, two non-design variables were necessary. The distribution of the peaks over analysis time was applied to describe the quality of the chromatographic separation. The sensitivity was described with the signal to noise ratio (S/N). The evaluation of the measured data was accomplished with the Analysis of Variance (ANOVA) and the Response Surface Methodology (RSM). Three main effects (concentration, ionization temperature, dwell time) and no significant interaction effect were found for the response variable “S/N”. The variables of concentration, ionization temperature, and dwell time had no significant effects for the response variable “S/N”. The ANOVA of the response variable chromatographic separation abandoned no significant effects as well. Therefore, robustness of the method can be guaranteed for all non significant design variables.     

X-ray observations of distant Abell clusters

We present results from a ROSAT HRI study of 11 distant ( z  ∼ 0.2–0.3) Abell clusters. We have performed a morphological analysis to search for and quantify substructure in the clusters. About 70 per cent of the sample shows significant evidence of substructure in the form of centroid shift or obvious X-ray clumps. We examine the clusters for the presence of cooling flows, and determine the physical properties of the ICM by deprojecting the HRI data. Nine of the clusters have central cooling times less than the age of the system, in agreement with fractions determined from nearby, X-ray-bright samples. Additional PSPC results are presented for four clusters in the sample, and ASCA results for six clusters. The temperatures and metallicities for these distant clusters appear to be consistent with nearby clusters of similar richness.     

Modern diatom, cladocera, chironomid, and chrysophyte cyst assemblages as quantitative indicators for the reconstruction of past environmental conditions in the Alps. II. Nutrients

Surface sediments from 68 small lakes in the Alps and 9 well-dated sediment core samples that cover a gradient of total phosphorus (TP) concentrations of 6 to 520 g TP l^-1 were studied for diatom, chrysophyte cyst, cladocera, and chironomid assemblages. Inference models for mean circulation log₁₀ TP were developed for diatoms, chironomids, and benthic cladocera using weighted-averaging partial least squares. After screening for outliers, the final transfer functions have coefficients of determination (r², as assessed by cross-validation, of 0.79 (diatoms), 0.68 (chironomids), and 0.49 (benthic cladocera). Planktonic cladocera and chrysophytes show very weak relationships to TP and no TP inference models were developed for these biota. Diatoms showed the best relationship with TP, whereas the other biota all have large secondary gradients, suggesting that variables other than TP have a strong influence on their composition and abundance. Comparison with other diatom – TP inference models shows that our model has high predictive power and a low root mean squared error of prediction, as assessed by cross-validation.